Multi-Function Switching Actuator (DIN)

Part Number: LT-ACT-MFN1216-KN-DIN01V1

Category: Actuator

Each individual channel can be configured as a switching channel or 2 adjacent channels can be configured as 1 curtain control channel or can be configured as combination of both.
Each relay channel is Normally Open.
ON delay and OFF delay for each of the switching channel.
Staircase function with duration timer for each of the switching channel.
Total Travel Time configuration for each of the Curtain Channel.
Support 8 Scene for each individual channel or for each pair of channels (if configured for curtain operation).
6 Profiles for timer based sequential actions.
Manual operation of the 12 relay output channels using on-board push buttons.
230V auxiliary power supply to enable manual operation of relays during KNX Bus failure.

📐 Technical Specification

➕ Accessories

📥 Documents

📹 Videos

📚 Application Note

📐 Technical Specification

➕ Accessories

📥 Documents

📹 Videos

📚 Application Note

Parameter	Description
Number of Channels	12
Voltage	30VDC SELV, KNX
Typical consumption on KNX bus	15mA
Standby consumption on KNX bus	7.5mA
Maximum permissible current per channel	16A
Maximum permissible current per device	80A
Connection Type	Typical TP1 bus connector for 0.80mm Ø rigid cable
External power supply (required only if manual operation is expected during KNX Bus failure)	230V
Operation temperature	-5°C … +45°C
Storage temperature	-20°C … +70°C
Degree of protection	IP20
Installation	DIN-rail
Housing material	ABS
Enclosure dimension (l x w x h mm)	106 x 90 x 58 mm
Cable cross-section	0.75-2.5mm²

Products